|
|
Post by dan on Mar 19, 2011 9:18:34 GMT -5
I'm going to try to make this as bad as I can in a good way.  |
|
|
|
Post by The Mad Modeller on Mar 20, 2011 22:38:00 GMT -5
Sounds fun
|
|
|
|
Post by dan on Mar 21, 2011 9:39:32 GMT -5
I sanded the trim off on the drivers door then drilled the holes.I don't have a drill bit small enough so I cut the head off a tiny pin and wrapped tape around it so it would fit in my rotary drill.I used tape as a strait edge and drilled the holes,it worked great.I also added a dent to the drivers door,I ground down some of the plastic on the inside of the door to make it easier to dent it.Still a long way to go...  |
|
|
|
Post by zbuckster on Mar 21, 2011 10:28:03 GMT -5
Great start.
|
|
|
|
Post by dan on Mar 24, 2011 8:56:10 GMT -5
Thanks Buck.I added rust holes and sprayed it flat red then brushed the Iron Metallic Surfacer on.Now I need to apply rubber cement where I wan't the paint to lift.Still thinking of a color.   |
|
|
|
Post by zbuckster on Mar 24, 2011 12:21:20 GMT -5
Looks good so far.
|
|
|
|
Post by dan on Mar 25, 2011 8:30:03 GMT -5
Thanks Buck,I'm not real happy with the way it is rusting.Some areas are not rusting so I'm going to reapply the rusting products and see what happens.Here is what I have so far.  |
|
|
|
Post by whtchevy on Mar 25, 2011 12:45:15 GMT -5
Dan what is the matter with the rust it looks real good from here ?
|
|
|
|
Post by zbuckster on Mar 25, 2011 13:59:20 GMT -5
I think the rust looks awesome.
|
|
|
|
Post by 68chevy on Mar 26, 2011 11:00:33 GMT -5
Looks awesome to me to keep up the good work.
|
|
|
|
Post by dan on Mar 29, 2011 10:30:31 GMT -5
Thanks Guys,Some spots just don't want to rust.I reapplied some of the Rust Antiquing Solution and it looks better.   |
|
|
|
Post by dan on Apr 7, 2011 8:28:09 GMT -5
A little more progress...   |
|
|
|
Post by zbuckster on Apr 7, 2011 12:58:52 GMT -5
Dan that is an awesome rust job.
|
|
|
|
Post by intimidator on Apr 10, 2011 19:03:22 GMT -5
Nice! ;D
|
|
