|
|
Post by shreddedtire82 on Apr 20, 2011 22:38:44 GMT -5
started with the revell 32 ford 5 window coupe  took a #23 blade heateded it with a lighter and cut the ragtop area out  figure i had to at least make it run right ;D sittin a nascar spec chevy between the rails  using the original motor mounts took a piece of craft wire and bent it to hold the chevy motor  |
|
|
|
Post by The Mad Modeller on May 24, 2011 12:29:03 GMT -5
Good start
|
|
|
|
Post by zbuckster on May 24, 2011 16:11:51 GMT -5
Great start.
|
|
|
|
Post by shreddedtire82 on May 25, 2011 19:21:08 GMT -5
ran into a problem.... the headers i was gonna use worked during the mock up but then when wen to assembly the engine and set it on the frame they didnt so tryin to find some that will work...... thinkin i might just have to give in and try making some and see where that goes  |
|
|
|
Post by shreddedtire82 on Jun 15, 2011 1:42:41 GMT -5
 the headers from a USA 1 kit the air cleaner is from the kit the distributor cap is from the 90 issue earnhardt lumina the engine got on ebay and a scratch built oil filter  red painted steel wheels   the radiator and electric cooling fan  what the engine looks like under the body  scratch built drive shaft  interior colors next to the red accent  |
|
|
|
Post by Nacho Z on Jun 15, 2011 10:37:40 GMT -5
Looks like you're getting a lot done. Red and black......always a good combo!
|
|
|
|
Post by zbuckster on Jun 15, 2011 14:39:02 GMT -5
Moving right along and looking good.
|
|
|
|
Post by shreddedtire82 on Jun 16, 2011 2:10:56 GMT -5
interior panels and seat  |
|
|
|
Post by zbuckster on Jun 16, 2011 11:32:00 GMT -5
Nice. Good color choices.
|
|
|
|
Post by shreddedtire82 on Jun 21, 2011 12:59:22 GMT -5
shortened the headers a little so they didnt sit so close to the ground   got the interior finished and in the body sittin on the frame  the drivetrain  |
|
|
|
Post by dan on Jun 21, 2011 16:38:20 GMT -5
Looks great so far.Do you have a "Macro" setting on your camera?That would make your pic's come out clearer.
|
|
|
|
Post by zbuckster on Jun 21, 2011 18:37:05 GMT -5
Very nice work.
|
|
|
|
Post by roadhawg on Jun 26, 2011 16:36:41 GMT -5
Wow! This is cool! Good job on the headers.
|
|
|
|
Post by shreddedtire82 on Sept 2, 2011 18:44:35 GMT -5
figured out the front suspension goin to use the front suspension from a revell 79 camaro kit get some pictures up in the next couple days
|
|
tool
Full Member
Posts: 448
|
Post by tool on Dec 7, 2011 12:56:01 GMT -5
lookin very cooooool !
|
|
