A "Little" Scale Model Fun - Answers

[snapper]

Time for a closer look - I have been wanting to do this for a while, so I finally had the chance to play around with these pics in between builds. They were taken with a 50 micron lens. See if you can guess what they are. They are not really product specific. I'll post the answers later. Have fun! Colby
Pic 1 airbursh hose (braided)
Pic 2 diamond burr bit
Pic 3 paint brush - coarse bristle
Pic 4 hobbyknife #11 blade
Pic 5 sandpaper - 1000 grit
Pic 6 sandpaper - 400 grit
Pic 7 razor saw blade
Pic 8 toothpick
Pic 9 flocking
Pic 10 tube glue
Pic 11 styrene sheet (.010)
Pic 12 metal file
Pic 13 cotton swab
Pic 14 paint jar lid
Pic 15 airbrush - nozzle end
Pic 16 metal foil
Pic 17 towel cloth - lint free

[roadhawg]

#3 is one of those cheapie Testors paintbrushes, and #7 is......a razor saw, maybe? No idea on the rest of them. Lol.

[tim]

I'll try a few. I agree with Tom on 3 and 7. Is #2 a diamond dremel bit, #6 sandpaper, #8 a toothpick, #11 styrene sheet, #12 a file, #13 a q-tip, #15 airbrush tip? Not quite sure of the others.

[Nacho Z]

I've been meaning to do this, so here it goes.....
1. No idea
2. Dremel bit
3. Cheap paint brush....Testors?
4. No idea
5. Smooth sandpaper or polishing cloth
6. Rough sandpaper
7. Razor saw
8. Paint brush handle
9. No idea
10. Side shot of a sanding stick
11. Edge of sheet styrene
12. File
13. Q-tip
14. No idea
15. Airbrush tip
16. BMF
17. Filter of some sort

[roadhawg]

Ok, looking again, #9 is maybe a paint booth filter?

[snapper]

You guys are good...
Nacho Z = you got 10 of them and the tough ones too - you even have the different grits down.
Tommy and Nacho Z = you'll know the answer to #9 if you just think automotive and custom interior...

[snapper]

answers on first post now

[roadhawg]

Lol! Good stuff! I would've NEVER got the glue tube!