|
|
Post by Gary Kulchock on Mar 31, 2008 6:29:43 GMT -5
It was a good 40 hour weekend on the bug, and I can see the light at the end of the tunnel. I figure another 50 hours over the next 10 days should finish it off. So here is what's done. This weekend was dedicated to getting the engine built and installed, along with the electrical system, fuel system, and all the associated linkages.  Motor installed, underside. Headers made from solder. Here's the 90% finished chassis befor installing the engine. And here is as far as I can get on the interior without installing it in the chassis. Should be installed tomorrow night.
 That's it for now. I'll start polishing out the body on Wednesday with hopes of mating it with the chassis this weekend. Later guys.
|
|
|
|
Post by The Mad Modeller on Mar 31, 2008 22:52:01 GMT -5
Gary that Bug is a masterpiece. Cant wait to see it in person.
|
|
|
|
Post by nascarrocks on Apr 1, 2008 22:25:47 GMT -5
All I can say is WOW
|
|
|
|
Post by 41Chevy on Apr 1, 2008 22:47:04 GMT -5
Words can not descibe how amazing this is!!Paul
|
|
|
|
Post by Gary Kulchock on Apr 4, 2008 19:53:07 GMT -5
Well, only 7 days remaining until the NNL East. I stayed home and played today on the beetle. I got all the final painting finished....... ... the chassis is all complete ...... .... the interior is as complete as I can get it without mounting the body ....... and the engine cover and roll bar have been installed. This is one of the three wiper blades prior to painting. It's modified Detail Master photo-etch parts and is only about 5/16" long. It's all mounted to a jewelers screw. This will be my last update on the bug. The next photos you will see, will be of the completed car. I better get busy.
|
|
|
|
Post by The Mad Modeller on Apr 4, 2008 20:19:38 GMT -5
Gary you are the master builer my friend. Cant wait to see the finished product.
|
|
towguy76
Junior Member
Takes a Mopar to catch a Mopar.
Posts: 108
|
Post by towguy76 on Apr 4, 2008 23:24:24 GMT -5
Are those exacto blades taped to popsicle sticks holding the parts for painting?
|
|
|
|
Post by Gary Kulchock on Apr 5, 2008 0:10:33 GMT -5
Are those exacto blades taped to popsicle sticks holding the parts for painting? They Sure Are! I call them "Toad Stickers" (Ask Nacho Z). Stick them into an area that won't be seen and spray paint away. You will also see tiny Radio Shack Micro Clips attached to bamboo. These work well also. |
|
towguy76
Junior Member
Takes a Mopar to catch a Mopar.
Posts: 108
|
Post by towguy76 on Apr 5, 2008 1:39:28 GMT -5
Are those exacto blades taped to popsicle sticks holding the parts for painting? They Sure Are! I call them "Toad Stickers" (Ask Nacho Z). Stick them into an area that won't be seen and spray paint away. You will also see tiny Radio Shack Micro Clips attached to bamboo. These work well also. I take it they are used dull blades? I noticed the roachclips, seen that before, but never exacto blades used like that. |
|
|
|
Post by Nacho Z on Apr 5, 2008 9:52:31 GMT -5
I can vouch for the "toad stickers". I've learned a lot of things from Gary and the toad stickers are one of my favs. Gary was even nice enough to give me my first stash of used #11s. BTW Gary, the Beetle is looking GREAT!!! At this time one week from now you'll be wowing them at NNL East. Can't wait!
|
|
stefan
Junior Member
Posts: 85
|
Post by stefan on Apr 7, 2008 14:42:02 GMT -5
 ! Scale-modeling at its best!!!
|
|
|
|
Post by Gary Kulchock on Apr 9, 2008 22:14:51 GMT -5
 Would anyone care to see the finished bug? I've been waiting 6 months for this. Finished 1 day prior to leaving for the NNL.     More photos will be posted on my Fotki site tomorrow. I'm going to bed because I deserve it. 
Later Guys!
|
|
|
|
Post by Nacho Z on Apr 10, 2008 17:10:10 GMT -5
Gary, what can be said? Phenomenal!! I can't put enough "wow" faces in this post. Everyone should take the time and check out your Fotki site to see the amount of work and craftsmanship that was put into this amazing model. Can't wait to see it tomorrow! |
|
|
|
Post by 67impala427 on Apr 10, 2008 18:33:39 GMT -5
Really nice work. Great detail.
Alex.
|
|
|
|
Post by The Mad Modeller on Apr 10, 2008 21:45:51 GMT -5
Gary that is one AWESOME build. You are a true master builder. Cant wait to see this one at the next meeting. Good luck in New Jersey.
|
|
|
|
Post by Gary Kulchock on Apr 13, 2008 10:17:11 GMT -5
My final post on the BeetleThis made the build all worth while. The icing on the cake if you will. Thanks to all who have watched along through this build. I'll be starting a new album soon on the completion of "Predator", to be shown at next years NNL East.
|
|
vwdave
Full Member
It's Ferb-tastic!
Posts: 292
|
Post by vwdave on Apr 13, 2008 10:51:18 GMT -5
Well-deserved hardware, Gary; it was an honor to share table space with you, Chopper and Bill. |
|
|
|
Post by The Mad Modeller on Apr 13, 2008 13:06:01 GMT -5
Congrats Gary. Well deserved Awards.
|
|
|
|
Post by empinut on Apr 13, 2008 14:17:33 GMT -5
I enjoyed watching this one get built. Bill |
|
gautreau
Full Member
Mini-Trucker
Posts: 252
|
Post by gautreau on Jun 30, 2008 21:39:32 GMT -5
Hey Gary,the beetle is in Scale Auto Mag on pg.42.It's part of The NNL East 22 coverage.
Jeremy
|
|
|
|
Post by Gary Kulchock on Jul 1, 2008 6:28:22 GMT -5
Hey Gary,the beetle is in Scale Auto Mag on pg.42.It's part of The NNL East 22 coverage. Jeremy Thanks for noticing Jeremy. I've been waiting to see this NNL issue of Scale Auto. The upcoming issue of Model Cars Magazine will print a 3 page feature on this bug. Coming soon I hope. |
|
|
|
Post by modelmasterbruce on Jul 1, 2008 20:27:06 GMT -5
Guys, I saw this model at NNL East and all I can say is WOW............
Bruce
|
|
|
|
Post by Gary Kulchock on Jul 1, 2008 21:25:57 GMT -5
Guys, I saw this model at NNL East and all I can say is WOW............ Bruce Thanks Bruce. |
|
|
|
Post by Gary Kulchock on Jul 29, 2008 6:19:49 GMT -5
As Navin Johnson would say, "I'm somebody now!" Latest issue of Model Cars hit the mail boxes yesterday.
|
|
|
|
Post by coopdad on Jul 29, 2008 6:38:02 GMT -5
Awesome! Congrats! John p.s. you were always somebody... you just didn't know it.  |
|
|
|
Post by Nacho Z on Jul 29, 2008 21:51:56 GMT -5
Man, and to think, I knew him when..... Gary, I'm not kissing your ring at the next meeting |
|
|
|
Post by daytonatim on Jul 30, 2008 5:49:35 GMT -5
Congratulations Gary!!!!
|
|
|
|
Post by Gary Kulchock on Jul 30, 2008 5:54:32 GMT -5
Man, and to think, I knew him when..... Gary, I'm not kissing your ring at the next meeting  That's good to know John because I don't wear a ring, and I don't get into that sort of thing. (LOL) |
|
|
|
Post by 41Chevy on Jul 30, 2008 11:54:48 GMT -5
;D ;D ;D ;D kudos!!!!!!!!!!!! Paul
|
|
|
|
Post by The Mad Modeller on Jul 30, 2008 20:40:47 GMT -5
Congrats on the mag Gary.
|
|
! Scale-modeling at its best!!!
Would anyone care to see the finished bug? 
That's good to know John because I don't wear a ring, and I don't get into that sort of thing. 
